Turn one control into another, like CC64 to CC67

All about the SoundFont editor Viena
Post Reply
FernandoBandeira
Posts: 5
Joined: Fri Apr 24, 2020 5:12 pm

Turn one control into another, like CC64 to CC67

Post by FernandoBandeira »

I would like to know how to change a CC64 control (hold) to CC67 (soft), stop functioning as CC64 and function as CC67 and thus be able to apply the modulators to the release, when the pedal is pressed.
Admin
Site Admin
Posts: 671
Joined: Tue Mar 17, 2015 9:22 am

Re: Turn one control into another, like CC64 to CC67

Post by Admin »

Somewhat tricky question... I guess you would just need to defined a new modulator for CC64?
FernandoBandeira
Posts: 5
Joined: Fri Apr 24, 2020 5:12 pm

Re: Turn one control into another, like CC64 to CC67

Post by FernandoBandeira »

How to make the release of 3 seconds only with the pedal pressed and half a second with the pedal released, if while the pedal is pressed it does not detect the release of the key in CC64?
FernandoBandeira
Posts: 5
Joined: Fri Apr 24, 2020 5:12 pm

Re: Turn one control into another, like CC64 to CC67

Post by FernandoBandeira »

I would like to add a 3 second release when pressing the pedal and 0.5 seconds when the pedal is released. that's easy. But you would have to cancel the pedal's holding effect, because while in holding it does not detect the release of the key.

How do I do that?
I just need that for the soundfont to be perfect.
Post Reply