Sustain Pedal not Working
Posted: Thu Jul 06, 2017 6:00 pm
I cannot get my sustain (hold) pedal (CC64) to cause the appropriate action in SynthFont1 (1.723), SynthFont2 (2.0.6.2), or SyFonOne (1.054). I have make a test midi file with the sustain (CC64) control change. I press the pedal, play 3 different pitched staccato notes, wait bit and release the pedal. If I just click on the midi file so Windows runs it then it does the sustain. But not in any of the three Synth* products. I think it is sustaining just the last note played. Installed on a Win 7 - 64.
The SF specs says: "MIDI CC64 Sustain - ACTIVE when greater than or equal to 64. When the sustain function is active, all notes in the key-on state remain in the key-on state regardless of whether a key-off command for the note arrives. The key-off commands are stored, and when sustain becomes inactive, all stored key-off commands are executed."
The SF specs says: "MIDI CC64 Sustain - ACTIVE when greater than or equal to 64. When the sustain function is active, all notes in the key-on state remain in the key-on state regardless of whether a key-off command for the note arrives. The key-off commands are stored, and when sustain becomes inactive, all stored key-off commands are executed."